VIZIO VM60P HDTV User Manual
Version 3/26/2007 35
www.VIZIO.com
10. Once Auto Scan has finished, you will be
returned to the previous menu. Note: If
you press OK, the Auto Scan process will
start again.
3.3.3 Setting DTV Channels Manually
If you feel that not all of the available digital TV channels were found with Auto Scan, then selecting this
option enables the TV to scan again to try to find any missing channels.
1. Press the button to highlight Manual
Scan and then press the OK button.
Note: A channel will be missed if it is not
transmitting at the time of the scan and so
you should try again at a time when you
know the station is transmitting programs.
A channel will also be missed if it is too
weak to be received. Re-orientation of the
antenna or changing to a higher gain
antenna may help, but note that any
changes to the antenna may affect other
channels.
2. The Manual Scan screen now appears
and this can be used in two ways. The
screen defaults to Add-On Mode and
pressing the OK button at this stage
makes the TV scan the whole channel
range again. Press EXIT to navigate
away from this screen.
Note: If the OK button is pressed, then the
automatic scanning will start again.
To Next Page
Loading...
Need help?
General
