VIZIO VM60P HDTV User Manual
Version 3/26/2007 31
www.VIZIO.com
3.2.2 Setting TV Channels
1. Press the MENU button on the remote
control to open the OSD menu. The
Video Settings Menu will be displayed.
2. Press the button on the remote three
times to highlight the Tuner Settings menu
and then press OK to select the menu.
3. Press the or button to select the
Cable or Antenna to match the source you
have connected to the DTV/TV input at
the rear of the Plasma HDTV. Press the
OK button when finished.
4. Press the button until Scan is
highlighted.
5. Press the button to start the search
for the available channels. When finished
the OSD will disappear. Note: This will
take a few minutes to complete.
To Next Page
Loading...
Need help?
General
