VIZIO VM60P HDTV User Manual
Version 3/26/2007 17
www.VIZIO.com
2.2 Connecting Your Cable or Satellite Box
2.2.1 Using HDMI
Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of
the Plasma HDTV for optimal results.
Connecting your Cable or Satellite Box (Best):
1. Turn off the power to the Plasma
HDTV and HDTV Set-Top Box.
2. Connect a HDMI cable to the
HDMI output of your HDTV Set-
Top Box and the other end to the
HDMI 1 Input (white color area)
at the rear of the Plasma HDTV.
3. Turn on the power to the Plasma HDTV and HDTV
Set-Top Box.
4. Select HDMI 1 using the INPUT button on the remote
or side of the Plasma HDTV, or directly by pressing
the HDMI button on the Remote Control.
Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters or less. See
www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Note:
a) The HDMI input on the Plasma TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
b) If you are already using the HDMI 1 input for another component, or you do not want to use
the HDMI 1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI 2,
HDMI 3 or HDMI 4 connection.
c) Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
To Next Page
Loading...
Need help?
General
