WBV.PU.002.EN VX136Q V2.0
4.7 Warning and safety stickers on the machine
Warning and safety stickers on the machine
• provide important information for the safe operation of the machine. Observing the stickers is for the
safety of persons who work with and on the machine.
• must remain legible, remove any contamination, if required.
• may not be removed and must be replaced immediately if damaged or lost.
Fig. 3: Positions of the warning and safety labels
(example only, the position of the stickers can vary depending on the size)
Before machine start-up, operating instructions must be
read!
Buffer or quenching fluid tank
(Only used for pumps with a mechanical
seal consisting of the material combination
SiSiC-SiSiC)
(To avoid adhesion of the mechanical seal faces this pump needs to be
rotated (at least one revolution) every two months when not in service!)
To Next Page
Loading...
