Vogelsang VX136Q - Machine and Motor on Base B (Belt Drive); Machine on Hand Cart; Machine on Three-Point Base

Assembly
WBV.PU.002.EN VX136Q V2.0
31
6.5.5 Machine and motor on base B (belt drive)
For this type of construction, please request the document “Technical information TINF.PU.020.xx,
accompanying sheet for belt drives”.
For machines with belt drive check the belt tension acc. to the accompanying sheet  Chap. “Maintenance
plan”:
• At start-up
• Before and after long periods of shutdown
• After the first 10 operating hours
• Every 2000 operating hours, once per year minimum
6.5.6 Machine on hand cart
WARNING
Risk of crushing or concussion due to falling machine caused by insufficient stability!
Secure the hand cart against toppling or rolling during standstill and when the pump is in operation.
6.5.7 Machine on three-point base
WARNING
Risk of crushing or concussion due to falling machine caused by insufficient stability!
Before operating the pump, ensure that the three-point base is properly attached and secured to the tractor.