Void Cyclone Series User Manual

Cyclone Series User Guide V1.0
Page 26
Figure 8.4: Attaching bracket to loudspeaker
Figure 8.5: Attaching loudspeaker to bracket
Step 3:
Attach the front of the bracket assembly to the
rear of the loudspeaker using all four M8/M10
bolts.
Step 4:
Lower the speaker assembly on to the rear of
the bracket assembly and fix the bolt into the
rear of assembly.
Figure 8.6b: Bracket adjustment
Figure 8.6a: Bracket adjustment
Step 5:
Adjust the bracket in the horizontal axis by
loosening the bolt at the rear of the assembly
(figure 8.6a) and in the vertical axis by adjusting
the bolt on the base of the assembly (figure 8.6b).
8.2 Cyclone 10 wall mounting

Void Cyclone Series Specifications

General

Brand	Void
Model	Cyclone Series
Category	Speakers
Language	English