Volvo Sensus - Media Player and Bluetooth Connectivity

03 Audio and media
03
* Option/accessory, for more information, see Introduction.
41
Traffic information (TP)
This function allows traffic information that is
broadcast within a set radio station's RDS
network to break through.
The
TP symbol indicates that the function is
activated. If any station in the list can send
traffic information then this is shown by TP
glowing brightly in the screen, otherwise TP
will be grey.
– To activate/deactivate, in the normal view
for the FM source, press OK/MENU and
select
TP.
Related information
•
RDS functions (p. 39)
Radio programme types (PTY)
One or more radio programme types, such as
pop and classical music can be selected for
DAB*-radio. After selecting a programme type
navigation only occurs among the channels
transmitting that type.
1. To select programme type, in the normal
view for the DAB source, press
OK/MENU and select
Programme type
(PTY) filtering
.
2. Turn TUNE to the programme type that is
to be marked/unmarked.
3. Mark/unmark the programme type with
OK/MENU.
4. When the desired programme types are
selected, leave the menu system using
EXIT.
PTY symbol is shown in the screen when the
function is active.
In some cases DAB radio will exit PTY mode,
see DAB to DAB* link (p. 43).
Related information
•
RDS functions (p. 39)
Volume control for interrupting RDS-
functions
The interrupting RDS-functions, e.g. alarm or
traffic information (TP), are heard at the vol-
ume selected for each respective programme
type. If the volume level is adjusted during the
programme interruption, the new level is
saved until the next programme interruption.
Related information
•
RDS functions (p. 39)
•
Alarms in the event of accidents and dis-
asters (p. 40)
•
Traffic information (TP) (p. 41)