Volvo Sensus - Automatic Connection of Bluetooth Device

03 Audio and media
03
55
2. In the normal view for the phone source,
press OK/MENU and select
Search new
phone (for media device Search new
device).
> The car will now search for available
Bluetooth
®
devices, which can take
approx. one minute.
3.
Select the Bluetooth
®
device in the list to
be connected, confirm with OK/MENU.
4. Check that the specified number code in
the car matches that in the external
device. In which case, choose to accept
in both places.
5. Choose in the phone to accept or reject
any options for phone contacts and mes-
sages.
> The external device is now connected.
If the connection failed, press EXIT and con-
nect the device as described under Alterna-
tive 2.
Alternative 2 - Search for the car with
the Bluetooth
®
function of the external
device
1. In the normal view for the phone source,
press OK/MENU, select
Make car
discoverable
and confirm with OK/
MENU.
2. Search with the external device for
Bluetooth
®
devices.
> The device will now search for availa-
ble Bluetooth
®
devices, which can take
approx. one minute.
3. Select the car's name on the external
device's screen.
4. Check that the specified number code in
the car matches that in the external
device. In which case, choose to accept
in both places.
5. Choose in the phone to accept or reject
any options for phone contacts and mes-
sages.
> The external device is now connected.
When the external device is connected, the
external device's Bluetooth
®
name is shown
in the car's display screen and the device can
be controlled from the car.
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a
Bluetooth
®
device (p. 53)
Automatic connection of Bluetooth
®
device
When a Bluetooth
®
device is registered (p. 54)
in the car the last external device connected
is connected automatically when the car is
started.
When the Bluetooth
®
function is active and
the last device connected is in range it is con-
nected automatically. If the last connected
device is not available then the system will try
to connect an earlier device.
To connect to another device, press EXIT,
select to connect a new device (p. 54) or
change to another already registered device
(p. 56).
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a
Bluetooth
®
device (p. 53)