Volvo Sensus - Voice Recognition - Mobile Phone; Voice Recognition - Quick Commands

||
03 Audio and media
03
66
* Option/accessory, for more information, see Introduction.
Related information
•
Voice recognition - quick commands
(p. 66)
•
Voice recognition - mobile phone (p. 66)
•
Voice recognition - radio (p. 67)
•
Voice recognition - multimedia (p. 68)
Voice recognition - quick commands
Voice recognition (p. 63) can be carried out
using a number of predefined quick com-
mands.
Quick commands for the multimedia system
and the phone can be found in the normal
view for MY CAR (p. 14) by pressing
OK/MENU and then selecting
Settings
Voice control settings Command list
Global commands, Phone commands,
Media commands, Radio commands and
Navigation commands*.
The help text for each command tells whether
the command can be used in all sources or if
it can only be used in one source.
Voice recognition - mobile phone
Voice control (p. 63) a Bluetooth
®
-connected
mobile phone to e.g. call a contact or dial a
number.
The following dialogues are only examples;
the system's response may vary depending
on the situation.
Dial a number
The system understands the numbers 0 (zero)
to 9 (nine). These numbers can be pro-
nounced individually, in groups of several
numbers at a time, or the whole number all at
once. Numbers greater than 9 (nine) cannot
be handled by the system, e.g. 10 (ten) or 11
(eleven) are not possible.
The following dialogue with voice commands
dials a number.
1. The user starts the dialogue by saying:
"
Dial number".
>
The system responds with: "
Say the
number".
2. Start saying the numbers (as individual
units, i.e. "
Six-eight-seven" etc.) in the
phone number.
> At the pause, the system will repeat
the last spoken group of numbers.
3. Continue to say the numbers. When the
whole number has been spoken, end by
saying: "
OK".
> The system dials the number.