03 Audio and media
03
56
Changing to another Bluetooth
®
device
It is possible to change from a connected
device to another one if there are several
devices in the car. The device must first have
been registered (p. 54) to the car.
Changing media device
1. Check that the external device has
Bluetooth
®
activated, see the external
device's manual.
2.
In the normal view for the Bluetooth
®
media source, press OK/MENU and
select
Change device.
> The car searches for previously con-
nected devices. The external devices
detected are specified with their
respective Bluetooth
®
name in the dis-
play screen.
3. Select the device to be connected.
> Connection of the external device
takes place.
Changing phone
1. Check that the external device has
Bluetooth
®
activated, see the external
device's manual.
2. In the normal view for the phone source,
press OK/MENU and select
Change
phone.
> The car searches for previously con-
nected devices. The external devices
detected are specified with their
respective Bluetooth
®
name in the dis-
play screen.
3. Select the device to be connected.
> Connection of the external device
takes place.
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a
Bluetooth
®
device (p. 53)
Disconnecting the Bluetooth
®
device
When the Bluetooth
®
device is out of range of
the car it is automatically disconnected.
When the mobile phone has been discon-
nected an ongoing call can continue by using
the mobile phone's built-in microphone and
speaker.
The handsfree function is deactivated when
the engine is switched off and the door is
opened
16
.
If you want to deregister a Bluetooth
®
device
from the car, see Removing a Bluetooth
®
device (p. 57). The car will then not search
for the device automatically.
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a
Bluetooth
®
device (p. 53)
•
Media Bluetooth
®
(p. 53)
•
Bluetooth
®
handsfree phone (p. 57)
16
Only Keyless Drive.
To Next Page
Loading...
