EMB-9670/9673 Series
10 EMB-9670/9673 Series User’s Manual
1. Getting started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
z 1 x EMB-9670 Series Intel Socket 479 Pentium® M/Celeron® M ITX
Main Board (Onboard Mobile Intel Celeron 600 MHz 0K L2 Cache CPU
for EMB-9673 Series)
z 1 x Quick Installation Guide
z 1 x CD-ROM contains the followings:
— User’s Manual (this manual in PDF file)
— Ethernet driver and utilities
— VGA drivers and utilities
— Audio drivers and utilities
z Cable set includes the followings:
— 1 ATA IDE cable (40-pin, pitch 2.54mm)
— 1 ATA IDE cable (44-pin, pitch 2.0mm)
— 1 FDD cable (34-pin, pitch 2.54mm)
— 1 Serial port cable (10-pin, pitch 2.54mm)
— 1 Serial port cable (40-pin, pitch 2.54mm)
To Next Page
Loading...
Need help?
General