User’s Manual
EMB-9670/9673 Series User’s Manual
61
3.5.2.9 Security Option
Select whether the password is required every time the system boots or only when you
enter setup.
Item Description
System
The system will not boot and access to Setup will be denied if the correct password is
not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the correct password is not
entered at the prompt.
Note: To disable security, select PASSWORD SETTING at Main Menu and then
you will be asked to enter password. Do not type anything and just press
<Enter>, it will disable security. Once the security is disabled, the system
will boot and you can enter Setup freely.
3.5.2.10 APIC Mode
The BIOS supports versions 1.4 of the Intel multiprocessor specification. When enabled,
the MPS Version 1.4 Control for OS can be activated.
The choice: Enabled/Disabled.
3.5.2.11 MPS Version Control For OS
This feature is to indicate the version of Multi-Processor Specification (MPS) that is using.
The choice: 1.1, 1.4
3.5.2.12 OS Select for DRAM > 64MB
Select the operating system that is running with greater than 64MB of RAM on the system.
The choice: Non-OS2, OS2.
3.5.2.13 Report No FDD For WIN 95
The original Windows95 requires the presence of a floppy. Unless the BIOS tells it to
disregard the absence of the drive, it will generate an error message. For other operating
systems as Win98 etc this field is without relevance.
Item Description
No Don’t generate error message
Yes Generate error message
3.5.2.14 Small Logo (EPA) Show
This item allows you enabled/disabled the small EPA logo show on screen at the POST
step.
Item Description
Enabled EPA Logo show is enabled
Disabled EPA Logo show is disabled
To Next Page
Loading...