PROPixx User Manual
Hardware and software requirements
Graphics Card
The graphics card should have dual-link DVI outputs, or DisplayPort/Thunderbolt outputs (which can be converted to
dual-link DVI through an active dongle).
We strongly recommend using the following adaptor, which can be obtained from VPixx Technologies or ACCEL Cables.
http://www.accellcables.com/collections/adapters/products/ultraav-displayport-or-mini-displayport-to-dvi-d-dual-link-
adapter-with-3d-support
USB 2.0
The host computer requires at least one USB 2.0 interface.
Operating System
The PROPixx is compatible with the following OS: MAC OS X, Windows XP (32bit, 64bit), Windows 7 (32bit, 64bit),
Windows 8 (32bit, 64bit) and Linux.
All DisplayPort adaptors are not created equal. The limitation is the 320 MHz video bandwidth which your
graphics board can transmit over a dual-link DVI video cable. This is enough bandwidth to generate a full
1920x1200 (or 1080) image at 120 Hz.
To Next Page
Loading...