VTech CD1291 - Page 18

14
Telephone settings
Feature/options Function
CALL LIST ORDER
BY TIME*
NEW CALL FIRST
Choose in what order received calls are displayed.
Reverse order. Last call received is displayed rst.
Unreviewed calls are displayed rst, then calls by time.
LANGUAGE
ENGLISH*
ESPANOL
FRANCAIS
Choose whether the display text appears in English,
Spanish, or French.
HOME AREA CODE
HAC - - -
Set the telephone to recognize calls from your area code
(7 digit local dialing).
Refer to Set home area code on page 17 for details.
LOCAL AREA CODE
LAC 1 - - -
LAC 2 - - -
LAC 3 - - -
LAC 4 - - -
Program up to four local area codes that do not require
dialing a 1 before them (10 digit local dialing).
Refer to Set local area code on page 18 for details.
DIAL TYPE
TONE*
PULSE
Set tone (touch-tone) or pulse (dial-pulse) dialing.
If you have dial-pulse dialing service only, you
can temporarily switch from dial-pulse to touch-
tone dialing during a call (see Temporary tone
dialing on page 21).
# OF RINGS
2, 3, 4*, 5, 6, 7,
tS 2-4, tS 4-6
Set how many times the telephone rings before the
answering system picks up the call.
If you choose tS 2-4 (or tS 4-6), the answering system
answers after two (four, if you select tS 4-6) rings if there
are new messages. When there are no new messages,
the answering system answers after four (six, if you
select tS 4-6) rings. When retrieving messages from a
long distance call, disconnect your call after three (ve,
if you select tS 4-6) rings to avoid long distance charges
(also known as toll saver).
MESSAGE ALERT
ON
OFF*
Turn the audible message alert on or off.
The telephone beeps every 15 seconds when there are
new messages.
No audible message alert.