VTech CD1291 - To Review One-Touch Numbers; To Dial a One-Touch Number

26
One-touch memory
To review one-touch numbers
Use the following steps to review one-touch numbers.
When the telephone is idle, press a one-touch key
(M1, M2 or M3) to choose the desired one-touch
memory location. The telephone shows the telephone
number stored in the location.
Press FLASH to return to idle mode.
If there is no number in the one-touch location you selected in step 1, the
telephone shows ------------.
The screen can show up to 12 digits at a time. If the number is longer than
12 digits, the screen only shows the last 12 digits.
•
•
To dial a one-touch number
Use the following steps to dial a desired telephone number stored in the one-
touch memory location.
When the telephone is idle, press a desired one-
touch key (M1, M2 or M3). The telephone shows the
telephone number stored in the selected one-touch
key.
Press DISPLAY DIAL. The telephone automatically
turns on the speakerphone and then dials the
displayed telephone number.
-OR-
Press DISPLAY DIAL and lift the handset. The telephone dials the number
automatically.
-OR-
Lift the handset then wait for the dial tone.
-OR-
Press SPEAKER to use the speakerphone then wait for the dial tone.
Press a desired one-touch key (M1, M2 or M3). The telephone
automatically dials the telephone number stored in the selected one-touch
key.
If there is no number in the one-touch location, when you press DISPLAY DIAL
you will hear an error tone.
1.
2.
1.
2.
1.
2.
8 0 0 - 6 2 4 - 5 6 8 8
11:20
AM
12-30
15
8 0 0 6 2 4 5 6 8 8
11:20
AM
12-30
15
8 0 0 - 6 2 4 - 5 6 8 8
11:20
AM
12-30
15