Getting started
7
Installation options
The telephone base comes with the bracket attached for tabletop use. If you
want to mount your telephone on a wall, use the provided mounting bracket
to connect with a standard dual-stud telephone wall-mounting plate. If you
do not have this mounting plate, you can purchase one from many hardware
or consumer electronic retailers. Professional assistance may be required to
install the mounting plate.
Tabletop to wall-mount installation
Before installing the telephone base in the wall-mount position, unplug the
power adapter from the electrical outlet and unplug the telephone line cord
from the telephone wall jack.
Lift the handset and place it aside. Hold down the switch hook on the
telephone base, then slide the handset tab upwards to remove it from the
slot. Rotate the handset tab 180 degrees. Push the handset tab down into
the grooves so it clicks into position.
1.
Switch hook
Handset tab
Hold the telephone base with both hands. Press on the outer tabs as shown
below to release the mounting bracket. Lift the mounting bracket away.
2.
Tabletop-mount
position
Outer tabs
To Next Page
Loading...
