VTech CD1291 - Alert Tones

54
Appendix
Alert tones
Beep
(Key tone)
A key is pressed.
Beeeep
(One short beep)
Command of the answering system is completed
successfully.
Beeeeeeeep
(One long beep)
The answering system begins to record an
announcement or a memo.
Three short high-pitched
beeps
(Conrmation tone)
Command is completed successfully.
One long low-pitched
beep
(Error tone)
Command has failed.
The number you entered in the one-touch memory
location, speed dial memory location or directory is
over 24 digits.
The name you entered in the directory is over 15
characters.
There are no telephone numbers stored in the
directory.
There are no call history entries.
You have reached the end of the directory records.
You have reached the end of the call history.
There is no telephone number in the one-touch
memory location you dialed.
There is no telephone number in the speed dial
memory location you dialed.
There is no telephone number in the call history entry
you dialed.
•
•
•
•
•
•
•
•
•
•
Beep-beep every 15
seconds
(Message alert tone)
There are new messages.
Four high- then low-
pitched beeps
(Priority call tone)
The incoming call is a priority call.
Beep-beep-beep
(Volume alert tone)
The volume (handset, speakerphone or message
playback) has reached the maximum or minimum.