VTech CD1291 - Directory Storage

32
Directory
Directory storage
Use the following steps to store a name and telephone
number in the directory.
When the telephone is idle, press DIR to enter the
directory.
Press SELECT. The screen shows ENTER NUMBER.
To copy the last number dialed, press REDIAL/PAUSE
(up to 24 digits).
-OR-
Use the dial pad keys to enter the telephone number
(up to 24 digits).
To backspace and erase a digit, press REMOVE.
To insert a four-second dialing pause, press REDIAL/PAUSE.
A P appears on the screen.
Press SELECT. The screen shows ENTER NAME.
Use the dial pad keys and Character chart on page
31 to enter the letters, digits or symbols (up to 15
characters). Press the key repeatedly until the desired
character shows on the screen.
To backspace and erase a character, press
REMOVE.
Press SELECT to save the entry. The screen shows
STORED with a conrmation tone and then returns to
the directory.
Repeat steps 2 through 6 to store more directory
entries.
-OR-
Press FLASH to return to idle mode.
If you enter more than 24 digits in a telephone number in step 3, the screen
shows ONLY 24 ALLOWED with an error tone.
If you enter more than 15 characters in a name in step 5, the screen shows
ONLY 15 ALLOWED with an error tone.
If there are already 25 stored entries, after you press SELECT in step 2, the
screen shows MEMORY FULL with an error tone and then returns to the
directory.
•
•
•
1.
2.
3.
•
•
4.
5.
•
6.
7.
STORED
11:20
AM
12-30
15
16 CALLS 12 NEW
11:20
AM
12-30
15
8 0 0 - 6 2 4 - 5 6 8 8
ELIZABETH JONES
11:20
AM
12-30
15
8 0 0 4 9 0 2 0 0 5 _
ENTER NUMBER
11:20
AM
12-30
15
8 0 0 4 9 0 2 0 0 5
ENTER NAME
11:20
AM
12-30
15
8 0 0 4 9 0 2 0 0 5
TOM MILLER_
11:20
AM
12-30
15