VTech CD1291 - One-Touch Memory; One-Touch Storage

25
This telephone has three one-touch memory locations (one-touch keys: M1,
M2 and M3) where you can store telephone numbers you wish to dial quickly.
Each one-touch memory location can store a telephone number with up to 24
digits.
One-touch storage
Use the following steps to store a telephone number in the desired one-touch
memory location.
When the telephone is idle, press MEM. The screen
shows ENTER LOCATION.
Press SELECT. The screen shows ENTER NUMBER.
To copy the last number dialed, press REDIAL/PAUSE
(up to 24 digits).
-OR-
Use the dial pad keys to enter the telephone number
(up to 24 digits).
To backspace and erase a digit, press REMOVE.
To insert a four-second dialing pause, press REDIAL/PAUSE.
A P appears on the screen.
Press a one-touch key (M1, M2 or M3) to choose the
desired one-touch memory location for the new entry.
The screen shows STORED with a conrmation tone.
If you enter more than 24 digits in step 3, the screen shows ONLY 24
ALLOWED with an error tone.
If the one-touch memory location you selected in step 4 is occupied, the
new telephone number replaces the old one. Take caution not to replace
entries you do not wish to delete from the one-touch memory locations.
•
•
1.
2.
3.
•
•
4.
8 0 0 6 2 4 5 6 8 8 _
ENTER NUMBER
11:20
AM
12-30
15
STORED
11:20
AM
12-30
15
_
ENTER LOCATION
11:20
AM
12-30
15
One-touch memory