VTech CD1291 - Speed Dial Memory; Speed Dial Storage

28
This telephone has 10 speed dial memory locations (speed dial locations)
where you can store telephone numbers you wish to dial quickly.
Each speed dial memory location can store a telephone number with up to 24
digits.
Speed dial storage
Use the following steps to store a telephone number in the desired speed dial
memory location.
When the telephone is idle, press MEM. The screen
shows ENTER LOCATION.
Press SELECT. The screen shows ENTER NUMBER.
To copy the last number dialed, press REDIAL/PAUSE
(up to 24 digits).
-OR-
Use the dial pad keys to enter the telephone number
(up to 24 digits).
To backspace and erase a digit, press REMOVE.
To insert a four-second dialing pause, press REDIAL/PAUSE.
A P appears on the screen.
Press MEM or SELECT. The screen shows ENTER
LOCATION.
Press a dial pad key (0 through 9) to choose the
desired speed dial memory location for the new entry.
The screen shows STORED and you will hear a
conrmation tone.
If you enter more than 24 digits in step 3, the screen shows ONLY 24
ALLOWED with an error tone.
If the speed dial memory location you selected in step 5 is occupied, the
new telephone number replaces the old one. Take caution not to replace
entries you do not wish to delete from the speed dial memory locations.
•
•
1.
2.
3.
•
•
4.
5.
8 0 0 6 2 4 5 6 8 8 _
ENTER NUMBER
11:20
AM
12-30
15
_
ENTER LOCATION
11:20
AM
12-30
15
STORED
11:20
AM
12-30
15
_
ENTER LOCATION
11:20
AM
12-30
15
Speed dial memory