18
Telephone settings
Set local area code
You can program up to four local area codes. A local area code is an area
code that must be dialed with the telephone number, even though you are
making a local call.
For calls outside your area:
For: If you dial: Enter in step 2:
Calls within your local
calling area
10 digits
(area code + telephone
number)
All area codes that do not
require a 1 before them
(you can program up to
four).
If you dial 10 digits (area code + telephone number) for calls within your own area
code, include your area code as a local area code.
Press MENU repeatedly until the screen shows LOCAL AREA CODE.
Use the dial pad keys (0 through 9) to enter three
digits of the rst local area code in LAC 1. Use CID/
or CID/ to move to the next or previous digit. Press
SELECT repeatedly to advance to the next local area
code (LAC 2, LAC 3 or LAC 4).
Press SELECT or MENU to save your setting and move to the next option
when you have nished entering local area codes.
If you do not need to program local area codes, press SELECT repeatedly until
the DIAL TYPE screen appears, or press FLASH to return to the idle screen.
Set remote code
You can program a remote code to allow remote access from another
telephone away from your home or ofce.
Press MENU repeatedly until the screen shows
REMOTE CODE.
Use the dial pad keys (0 through 9) to enter three
digits of your remote code. Use CID/ or CID/ to move to the next or
previous digit.
Press SELECT or MENU to save the setting and move to the next option
when you have nished entering remote code.
1.
2.
3.
1.
2.
3.
L A C 1 - - -
LOCAL AREA CODE
11:20
AM
12-30
15
5 0 0
REMOTE CODE
11:20
AM
12-30
15
To Next Page
Loading...
