VTech CD1291 - Message Playback

46
Answering system operation
Message playback
To play messages
If you have new messages, the system plays only
the new messages (oldest rst). If there are no new
messages, the system plays all messages (oldest rst).
Press PLAY/STOP to begin message playback.
Press PLAY/STOP to end message playback.
If there are no messages, when you press PLAY/STOP to begin message
playback, the telephone announces, “You have no messages.“
Information about messages
Before each message, the answering system announces the day and
time (day/time stamp) it was received. The message window displays the
message number currently playing.
After the last message, the answering system announces, “End of
messages.”
If the date and time are not set (see Set date and time on page 16), SET
CLOCK ashes on the screen and before each message the answering
system announces “Time not set.”
Options during message playback
To adjust the playback volume to a comfortable level (L1 through L9), press
VOLUME.
To skip to the next message, press SKIP/ANNC.
To go back to the previous message, press REPEAT/MEMO while the
telephone is playing the day and time the current message was received.
To repeat the message currently playing, press REPEAT/MEMO after the
telephone plays the day and time the current message was received.
To delete the message currently playing, press DELETE.
To stop playback and exit, press PLAY/STOP.
After a power outage, once the phone regains power, the playback volume
automatically resets to L5.
If you have reached the highest or lowest setting when you press
VOLUME, the telephone beeps three times.
•
•
1.
2.
•
•
•
•
•
•
•
•