VTech CD1291 - To Delete a One-Touch Number

27
One-touch memory
To delete a one-touch number
Use the following steps to delete a telephone number stored in the one-touch
memory location.
When the telephone is idle, press a one-touch key
(M1, M2 or M3) to choose the desired one-touch
memory location. The telephone shows the telephone
number stored in the location.
Press REMOVE. The screen shows DELETED with a
conrmation tone and then the screen shows ENTER
LOCATION. You cannot retrieve an entry once you
have deleted it.
Press FLASH to return to idle mode.
-OR-
When the telephone is idle, press MEM and then SELECT. The screen
shows ENTER NUMBER.
Press a desired one-touch key (M1, M2 or M3). The screen shows
DELETED with a conrmation tone and then the screen shows ENTER
LOCATION. You cannot retrieve an entry once you have deleted it.
If you press REMOVE and there is no number in the one-touch location, you
will hear an error tone.
1.
2.
3.
1.
2.
8 0 0 - 6 2 4 - 5 6 8 8
11:20
AM
12-30
15
DELETED
11:20
AM
12-30
15