VTech CD1291 - Answering System Operation; Message Capacity; Answering Mode

43
Message capacity
The answering system can record up to 99 messages,
depending on the length of each message. Individual
message can be up to three minutes long, and the
total maximum recording time is 19 minutes. Messages
remain available for replay until you delete them.
If the recording memory is full, the message window displays F. Delete some
messages to make room for more.
Answering mode
To turn on the answering system
To turn the answering machine on and answer calls:
Press ON/OFF until the system announces
“Answering machine is on.” The ON/OFF light is
on.
When the answering system is turned on, if
recording time is less than ve minutes, the system
announces “Less than ve minutes record time left.”
When the answering system is turned on, if the
memory is full, the system announces “Memory is full.”
If the recording memory is full, the answering system answers the incoming
call after 10 rings and announces, “Memory is full. Enter remote access code.”
The telephone does not record messages and hangs up automatically if the
remote access code is not entered within 15 seconds.
To turn off the answering system
To turn the answering machine off and not answer calls:
Press ON/OFF until the system announces, “Answering machine is off.”
The ON/OFF light is off and the message window is
blank.
If the answering system is off, after 10 rings, the system
announces “Enter remote access code.” The telephone
hangs up automatically if the remote access code is not
entered within 15 seconds.
•
•
•
•
16 CALLS 12 NEW
11:20
AM
12-30
15
Message window
16 CALLS 12 NEW
11:20
AM
12-30
15
16 CALLS 12 NEW
11:20
AM
12-30
Answering system operation