Make sure you set the date and time including the year correctly; otherwise the answering
system does not announce the correct day of the week for your recorded messages time
stamp.
Use the dialing keys (0-9) to enter the month, date, and year, and then press
NEXT .
Use the dialing keys (0-9) to enter the hour and minute.
Press or on the handset, or CALLS / or PHONEBOOK /
on the telephone base to scroll to choose AM or PM, and then press SAVE to
save.
Check for Dial Tone
Press
/TALK/RECALL
or on the handset, or on the telephone base. If you
hear a dial tone, the installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service to digital
service from a cable company or a VoIP service provider, the telephone line may
need to be rewired to allow all existing telephone jacks to work. Contact your
cable/VoIP service provider for more information.
Operating Range
The handset and telephone base can communicate over only a certain distance
- which can vary with the locations of the telephone base and handset, the weather,
and the layout of your home or office.
When the handset is out of range, the handset displays Out of range OR no power
at base and Put HS on base to power base alternately.
If there is a call while the handset is out of range; it may not ring, or if it does ring,
the call may not connect well when you press
/TALK/RECALL
or . Move closer
to the telephone base, and then press
/TALK/RECALL
or
to answer the call. If
the handset moves out of range during a telephone conversation, there may be
interference. To improve reception, move closer to the telephone base.
•
1.
2.
3.
•
•
To Next Page
Loading...
Need help?
General
