VTech VC7002A User Manual

43
Quiet Mode
You can turn on the quiet mode for a period of time. During
this period, all tones (except paging tone) and call screening
are muted. When you turn on the quiet mode, the answering
system turns on automatically.
1. Press and hold on the handset or telephone base when
idle.
2. Use the dialing keys (0-9) to enter the duration, and then
press SELECT to save.
NOTES
To turn off the quiet mode, press and hold on the handset or telephone base when idle.on the handset or telephone base when idle.
Sensor alert tone and announced alert will not be silenced in quiet mode.
Synchronize the Date & Time with Calling Number Display Service
1. Press MENU on the handset or telephone base when idle.
2. Press PressPress or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Phone setup, then press SELECT.
3. Press PressPress or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to CID time sync, then press SELECT.
4. Press PressPress or on the handset, or CALLS / or PHONEBOOK /
on the telephone base to scroll to choose On or Off, and then press SELECT.
Dial Mode
The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone to make a call.
1. Press MENU on the handset or telephone base when idle.
2. Press PressPress or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Phone setup, then press SELECT.
3. Press PressPress or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Dial mode, then press SELECT.
4. Press PressPress or on the handset, or CALLS / or PHONEBOOK /
on the telephone base to scroll to Touch-tone or Pulse, then press SELECT.
There is a confirmation tone and the screen returns to the previous menu.and the screen returns to the previous menu.
•
•
BACK

VTech VC7002A Specifications

General

Brand	VTech
Model	VC7002A
Category	Accessories
Language	English