63
Use your Built-in Answering System
New Message Indication
When you received a message on your answering system,
displays on both the handset and telephone base, XX
New msgs displays on the handset, and XX New messages
displays on the telephone base. To retrieve, press /PLAY
when the phone is not in use.
Message Playback
To play messages at the telephone base:
Press /PLAY when the phone is not in use.
Options during playback:
Press /VOL/ to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing.
Press /REPEAT twice to listen to the previous message.
Press X/DELETE to delete the playing message. The
system advances to the next message.
Press /STOP to stop.
Press to call back the caller if the message contains caller ID information. The
telephone base screen displays Call back? with the caller ID information.
Press CALL to call back the caller.
Press BACK to restart the message playback.
To play messages at the handset:
1. Press MENU when the handset is not in use.
2. Press or to scroll to Play messages, and then press SELECT.
If there are new and old messages, press or to select Play new msgs or
Play old msgs, then press SELECT.
If there are only new or only old messages, they will play automatically.
The system announces the number of messages, then begins playback. The
message sequence is shown on the handset. If there are no recorded messages,
the handset shows No messages and you hear, “You have no messages.”
Options during playback:
Press VOLUME/ or VOLUME/ to adjust the message playback volume.
Press SKIP to skip to the next message.
Press REPEAT to repeat the message. Press REPEAT twice to listen to the
previous message.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
