59
Set your Built-in Answering System
Your answering system has various features, read below for the basic settings.
The total storage capacity for the announcement, messages and memos in the
answering system is approximately 22 minutes. The actual recording time depends
on individual message characteristics.
Your answering system allows you to set your announcement, to save and delete
messages, activate call screening, to set number of rings before pick up, to access
remotely, and to control the recording time.
Turn the Answering System on or off
The answering system must be turned on to answer and
record messages.
Using the telephone base:
Press /ANS ON/OFF on the telephone base to turn the
built-in answering system on or off.
-OR-
Using the telephone base or handset:
Press MENU when the phone is not in use.
Press SELECT to select Answering sys.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to highlight Answer ON/OFF, and then press SELECT.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to highlight On or Off, and then press SELECT to save.
You hear a confirmation tone.
Default Announcement
The telephone is preset with a greeting that answers calls with “Hello, please leave
a message after the tone.” You can use this preset announcement, or replace it
with your own.
•
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
