Set a Time Range for Alerts
You can choose to receive an announcement alert - ““Contact X is open” or “Motion
X sensor detected motion”, when a monitored door, window, drawer, cupboard, when a monitored door, window, drawer, cupboard
or jewelry box is opened, or when there is motion in the monitored area, during a
preset time period of the day. For example, you can set to receive alert only from
10pm to 6am during bedtime.
You can also set a reminder in case you forget to close the monitored object. You
can also choose to receive an alert once again if it remains open after 15, 30, or 60
minutes.
Press SENSORS on the handset or telephone base when idle, and then press
or on the handset, or CALLS / or PHONEBOOK/ on the telephone base to
scroll to the desired sensor.
-OR-
i. Press MENU when the phone is not in use.
ii. Press or on the handset, or CALLS / or PHONEBOOK/ on the
telephone base to scroll to Sensors, and then press SELECT.
iii. Press or on the handset, or CALLS / or PHONEBOOK/ on the
telephone base to scroll to the desired sensor, and then press SELECT.
2. Press OPTIONS to enter the individual sensor menu.
3. Press or on the handset, or CALLS / or PHONEBOOK/
on the telephone base to scroll to choose Set schedulechedule, and then press
SELECT.
4. Press or on the handset, or CALLS / or PHONEBOOK/ on the
telephone base to scroll to choose Time range, and then press SELECT.
• If time range has been set previously, press EDIT to edit.
5. Use the dialing keys (0-9) to enter the hour and minute for the start time. Scroll
to choose AM or PM, and then press NEXT.
6. Use the dialing keys (0-9) to enter the hour and minute for the end time. Scroll to
choose AM or PM, and then press SAVE. The reminder menu appears.
7. Scroll to choose Off, 15 minutes, 30 minutes, or 60 minutes, and then press
SELECT to save.
To Next Page
Loading...
Need help?
General
