VTech XS1050 - Set the Type of Calls to be Stored in the Call List; Call Blocker; Set Block Mode

30
NOTE
• If you want to delete all call list entries,
press ▼/▲ to select DELETE ALL
instead of DELETE.
Set the type of calls to be
stored in the call list
1. Press when the phone is not in
use.
- OR -
Press and ▼/▲ to select CALL
LIST. Press to confirm.
2. Press to display the options.
Press ▼/▲ to select CATEGORY, and
then press to confirm.
3. Press ▼/▲ to select ALL CALLS or
MISSED CALLS.
4. Press to save.
NOTE
• ALL CALLS will store the calls of
answered calls and unanswered calls.
MISSED CALLS will only store those
unanswered calls.
Call blocker
If you have subscribed to Caller ID service,
you can use the call blocker feature to
block certain calls automatically.
You can block calls by adding the
numbers into the Black List. The Black
List can store up to 100 entries which is
shared with the phonebook.
You can also block or allow certain types
of calls, for example, calls that have
hidden their caller ID, calls without caller
ID, international calls or calls made from
payphones.
You can also choose to block all calls or
allow certain calls in the VIP list.
When a call is blocked, the telephone
will not ring.
Set block mode
1. Press when the phone is not in
use.
2. Press ▼/▲to scroll to CALL BLOCKER,
and then press to select.
3. Press ▼/▲to scroll to SETTINGS, and
then press to select.
4. Press again to choose BLOCK
MODE.
5. Press ▼/▲to choose BLOCK ALL/
ALLOW VIP/BLOCK BLIST/OFF, and
then press to select.
• BLOCK ALL - block all unknown
calls except numbers stored in the
phonebook and VIP list.
• ALLOW VIP - only allow numbers
stored in the VIP list. All other calls