VTech XS1050 - Default Outgoing Message; Record Your Own Outgoing Message; Play and Delete Your Outgoing Message; Options During Playback

47
Default outgoing message
The telephone is preset with a greeting
that answers calls with “Hello. Your call
cannot be taken at the moment. So
please leave your message after the
tone.” You can use this preset outgoing
message, or replace it with your own.
Record your own outgoing
message
1. Press when the phone is not in
use.
2. Press to select ANS. MACHINE.
3. Press ▼/▲ to scroll to TAM SETTINGS,
and press to select.
4. Press ▼/▲ to scroll to OGM
SETTINGS, and press to select.
5. Press ▼/▲ to scroll to ANS & REC or
ANSWER ONLY and press to
select.
6. Press ▼/▲ to scroll to RECORD
MESS, and press to select.
7. During RECORDING, select and press
to stop and save the recording
and return to previous menu option.
• Select and press to stop the
recording without saving and
return to previous menu option.
• Maximum recording length is 3
minutes.
Play and delete your
outgoing message
1. Press when the phone is not in
use.
2. Press to select ANS. MACHINE.
3. Press ▼/▲ to scroll to TAM SETTINGS,
and press to select.
4. Press ▼/▲ to scroll to OGM
SETTINGS, and press to select.
5. Press ▼/▲ to scroll to ANS & REC or
ANSWER ONLY, and press to
select.
6. Press ▼/▲ to scroll to PLAYBACK,
and press to select.
7. During PLAYING, select to stop
the outgoing message playback and
return to previous menu option.
• Select to delete your
outgoing message and return to
previous menu option.
• Default outgoing message
cannot be deleted.
NOTE
• After you deleted your own
recorded outgoing message, the
answering machine answers calls
with the default outgoing message.
Options during playback
• Press ▼/▲ on the cordless handset
to adjust the listening volume.
• Press to switch between
the speakerphone and handset
earpiece.