45
Register a handset
When your handset is deregistered
from the telephone base, follow the
steps below to register it back to the
telephone base.
1. Remove the handset from the
telephone base.
2. Press when the phone is not in
use.
3. Press ▼/▲ to choose REGISTRATION,
and then press to select.
• PIN? - - - - displays; - - - - cursor
flashes.
4. Enter the 4-digit system PIN, and
press . (Default: 0000)
Press and hold at the telephone
base for about five seconds.
• PLEASE WAIT displays.
• REGISTER! displays if the handset
fails to register to the base.
• If handset is registered to the
base sucessfully, the base will
assign next available handset
number to the handset
automatically.
• You hear a beep when the
registration process completes.
• The registration process takes
about 60 seconds complete.
NOTE
• If your handset is new, make sure
you charge it before attempting
registration.
Reset phone settings
You can reset your phone to the default
settings. After reset, all settings and
entries (except phonebook) will be
deleted.
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose DEFAULT, and
then press to select.
• PIN? - - - - displays; - - - - cursor
flashes.
3. Enter the 4-digit system PIN, and
press . (Default: 0000)
4. Press to confirm.
To Next Page
Loading...
