VTech XS1050 - Answering Machine and Settings; Set Your Built-In Answering Machine; Set the Answer Mode; Select the Answering Machine Language

46
Answering machine
and settings
Set your built-in answering
machine
The answering machine can record and
store up to 99 messages. Each message
can be up to three minutes in length. The
total storage capacity for the outgoing
message, messages and memos is
approximately 30 minutes. The actual
recording time depends on individual
message characteristics.
Your answering machine allows you to
set your outgoing message, to save and
delete messages, activate call screening,
to set number of rings before pick up,
and to access remotely.
NOTE
• Make sure you Set date and time
correctly.
Set the answer mode
The answering machine has two types
of answer mode. One is ANS & REC, and
the other one is ANSWER ONLY.
ANS & REC is the default setting, and it
answers the calls and allows callers to
leave a message. ANSWER ONLY, on
the other hand, only answer the calls
but it does not allow callers to leave any
messages. It will prompt callers to call
back later.
1. Press when the phone is not in
use.
2. Press to select ANS. MACHINE.
3. Press ▼/▲ to scroll to TAM SETTINGS,
and press to select.
4. Press to select ANSWER MODE.
5. Press ▼/▲ to select ANS & REC or
ANSWER ONLY.
6. Press to confirm.
Select the answering machine
language
1. Press when the phone is not in
use.
2. Press to select ANS. MACHINE.
3. Press ▼/▲ to scroll to TAM SETTINGS,
and press to select.
4. Press ▼/▲ to scroll to TAM LANGUAGE,
and press to select. Select from
the following languages:
• ENGLISH;
• DEUTSCH; and
• FRANCAIS.