VWR AVANTOR E-BURETTE - Page 8

7. If charging is required, insert the charging pin at the back of the
control panel and connect the power cord with the AC adaptor
firmly and then plug the two pin power cord to the 220 V power
supply.
(Fig. 11)
8. The battery indicator will show the charging symbol.
(Fig. 12)
9. The E-Burette is now ready to be switched on. Press the ON/OFF
button at the back of the control panel to switch ON the control
panel.
(Fig. 13)
Transporting the instrument
● When mounted to a reagent bottle, always carry the instrument as
shown and always store it in the upright position.
(Fig. 14)
8 vwr.com I Instruction manual VWR
®
E-Burette
Fig. 11
Fig. 12
Fig. 13
Fig. 14