16 Technical data
100_0202_td_0027.fm 41
16.4.1 Extension cable
The following points must be observed:
Only use approved extension cables.
Data about the model designation and voltage of this machine is located on the nameplate.
The necessary stranded conductor cross-section can be found in the following table.
WARNING
Warning of electrical voltage!
Serious injury due to electric shock.
Check power cable and extension cable for damage.
Only use extension cables whose grounded conductor is connected to the plug and
coupling - only for machines of class rating I + III, see chapter Technical data.
Machine type Voltage
[V]
Extension
[m]
Stranded conductor
cross-section
[mm
2
]
C48/4 230 <150 1.5
C48/13 230 <150 1.5
To Next Page
Loading...
Need help?
General
