EasyManuals Logo

Wacker Neuson CRT 48 User Manual

Wacker Neuson CRT 48
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
wc_si000188gb.fm
14
Safety Information CRT 48
1.5 Service Safety
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while servicing or
maintaining this machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
In addition, before servicing or maintaining the machine:
Tie back long hair.
Remove all jewelry (including rings).
Do not attempt to clean or service the machine while it is running. Rotating parts
can cause severe injury.
Do not crank a flooded engine with the spark plug removed on gasoline-
powered engines. Fuel trapped in the cylinder will squirt out the spark plug
opening.
Do not test for spark on gasoline-powered engines if the engine is flooded or the
smell of gasoline is present. A stray spark could ignite the fumes.
Do not use gasoline or other types of fuels or flammable solvents to clean parts,
especially in enclosed areas. Fumes from fuels and solvents can become
explosive.
ALWAYS turn engine off and remove key from machine before performing
maintenance or making repairs.
Handle blades carefully. The blades can develop sharp edges which can cause
serious cuts.
Keep the area around the muffler free of debris such as leaves, paper, cartons,
etc. A hot muffler could ignite the debris and start a fire.
When replacement parts are required for this machine, use only Wacker
Neuson replacement parts or those parts equivalent to the original in all types of
specifications, such as physical dimensions, type, strength, and material.
Disconnect the spark plug on machines equipped with gasoline engines, before
servicing, to avoid accidental start-up.
ALWAYS switch off the power supply at the battery disconnect before adjusting
or maintaining the electrical equipment.
Keep the machine clean and labels legible. Replace all missing and hard-to-
read labels. Labels provide important operating instructions and warn of
dangers and hazards.
WARNING
A poorly maintained machine can become a safety hazard! In order for the
machine to operate safely and properly over a long period of time, periodic
maintenance and occasional repairs are necessary.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson CRT 48 and is the answer not in the manual?

Wacker Neuson CRT 48 Specifications

General IconGeneral
BrandWacker Neuson
ModelCRT 48
CategoryTrowels
LanguageEnglish

Related product manuals