EasyManuals Logo

Wacker Neuson CRT 48 User Manual

Wacker Neuson CRT 48
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
wc_tx000642gb.fm
44
Maintenance CRT 48
5.15 Kohler—Engine Oil and Filter
Change oil every 125 hours and oil filter (b) every 250 hours. On new machines,
change oil after first 50 hours of operation. Drain oil while engine is still warm.
Note: In the interests of environmental protection, place plastic sheeting and a
container under the machine to collect the liquid which drains off. Dispose of this
liquid properly.
To change oil:
1. Remove oil filler cap (a) and oil drain plug (c). Drain oil into a suitable container.
2. Reinstall the drain plug and tighten.
3. Remove and replace oil filter (b).
4. Remove oil filler cap (a) and fill engine crankcase with recommended oil. See
Technical Data for oil quantity and type.
5. Install oil filler cap.
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged
periods of time.
f Take steps to avoid inhaling or ingesting used engine oil.
f Wash skin thoroughly after exposure to used engine oil.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson CRT 48 and is the answer not in the manual?

Wacker Neuson CRT 48 Specifications

General IconGeneral
BrandWacker Neuson
ModelCRT 48
CategoryTrowels
LanguageEnglish

Related product manuals