Wacker Neuson CRT 48 User Manual

CRT 48 Troubleshooting
wc_tx001541gb.fm 47
Machine does not respond cor-
rectly to control lever movement.
Sheared key. Check all keys in drive system.
Trowel noisy. Trowel blades have become mis-
aligned and are contacting each
other during rotation.
Replace damaged blades. Align
blades so that one set represents
a (+) and the other an (x) when
viewed from above.
Sheared key. Check all keys in drive system.
Loose clutch. Tighten clutch.
Engine does not start. Engine problem. Consult engine manufacturer’s
service manual.
Problem Reason Remedy

Wacker Neuson CRT 48 Specifications

General

Brand	Wacker Neuson
Model	CRT 48
Category	Trowels
Language	English