7 Maintenance DPU 100-70Les
40 Operator's manual
Draining engine oil
1. Loosen the clamp of the oil drain hose.
2. Run the oil drain hose around the side of the protective frame and into the
container.
3. Unscrew and remove the screw plug of the oil drain hose.
4. Once the oil has completely drained out, screw in and fasten the screw plug.
5. Fix the oil drain hose with the clamp.
6. Fit the left-hand lateral protection cover and screw it tight.
Note:
Dispose of the oil in accordance with the applicable environmental regulations.
To Next Page
Loading...
