DPU 100-70Les 7 Maintenance
Operator's manual 37
7.2.2 Checking motor oil level and topping up engine oil
Checking the engine oil level
1. Place the machine upright on a flat surface.
2. Remove any dirt around the oil level dipstick.
3. Pull out dipstick.
4. Wipe off dipstick with dry, lint free towel.
5. Fully insert dipstick.
6. Pull out dipstick.
7. Check whether the oil is between the lower and upper mark on the dipstick.
8. Fully insert dipstick.
Item Designation
1 Oil level dipstick
2Mark
To Next Page
Loading...
