DPU 100-70Les 7 Maintenance
Operator's manual 41
Pouring in engine oil
Note:
The engine has two oil filler necks.
Pour in the oil through both oil filler necks.
1. Fold up cover.
2. Remove dirt around the oil cap.
3. Unscrew and remove oil filler caps.
4. Using a funnel, pour engine oil into the opening until the upper mark is
reached on the oil level dipstick.
See the chapter Technical data for oil quantity and oil specification.
5. Screw in cover for oil filler cap, and tighten until hand-tight.
6. Wipe off any spilled oil.
Item Designation
1Oil cap
To Next Page
Loading...
