DPU 130Le 8 Use and operation
Operator's manual
62
Deactivating the machine
1. Open rear protective hood.
2. Press the ON/OFF switch on the machine to deactivate the machine.
The machine is deactivated when the Operation control lamp and the
receiver units extinguish.
3. Recharge the remote control battery with the coiled helix cable.
4. Close rear protective hood.
Note: If you do not deactivate the machine, it will automatically deactivate
after approx. 1 hour (factory default setting).
You can set the turn-off time in the configuration menu.
WARNING
Unauthorized persons operating the machine can cause serious injuries.
f Ensure that no unauthorized persons have access to the machine and
remote control.
f Always secure the remote control in a safe place, e.g. inside the locked
machine.
Item Designation Item Designation
1 Control lamps 3 ON/OFF switch
2 Display screen