DPU 130Le 8 Use and operation
Operator's manual
66
Charging battery with external charger
Note: Before the first charging, read the charger instructions.
1. Place battery in external charger.
2. Connect the country-specific connecter plug to the charger.
3. Insert the charger plug into the plug receptacle.
The status control lamp is lit in orange when the battery is charging.
The status control lamp flashes orange when the battery is charged.
4. Pull the plug from the receptacle when the battery is charged.
5. Removing battery from external charger
Inserting battery into remote control
f Insert battery into remote control until lug locks into place.
Item Designation Item Designation
1 Connector plug 3 Battery
2 Status control lamp
Item Designation
1 Battery
2Lug
To Next Page
Loading...
