Wacker Neuson ET65 - Page 176

5-48 BA E14 track en* 1.3 * E14t_13_510.fm
5 Operation
1. Start engine and lower the control lever base.
2. Move the attachment inward completely and lower it about 5–10 cm
(2–4 in) above the ground.
3. Pull lock A down.
4. Press switch B down.
➥ The symbol Hydraulic quickhitch enabled appears and the buzzer
sounds.
5. Press push button C within 10 seconds.
➥ The quickhitch opens.
➥ Check pin D must be fully extended.
A
Fig. 211
B
C
Fig. 212
Fig. 213
Fig. 214
D