Wacker Neuson ET65 - Hydraulic Connections

5-54 BA E14 track en* 1.3 * E14t_13_510.fm
5 Operation
Connecting and disconnecting hydraulic couplings
1. Park the vehicle – see chapter “ Preparing lubrication” on page 7-9
2. Turn the starting key to position 1.
3. Move the control lever or the pedal of the hydraulic circuit in all
directions repeatedly.
4. Remove the starting key and carry it with you.
➥ The couplings of the attachment can now be coupled and uncoupled.
Hydraulic connections
Information
Follow the instructions in the Operator’s Manual of the attachment
manufacturer for connecting the hydraulics to the attachment.
Fig. 229
A
B
C
Connection Stick (left/right)
A AUX V
B AUX II
C AUX I
Fig. 230
C
AB