Wacker Neuson ET65 - Opening the Engine Cover

BA E14 track en* 1.3 * E14t_13_700.fm 7-23
Maintenance 7
Opening the engine cover
1. Stop and park the vehicle. Stop the engine.
-See “Preparing lubrication”.
2. Turn the starting key in lock A anticlockwise.
3. Press lock A and pull handle B.
The engine cover is supported by a gas strut with lock C (item 1).
Close the engine cover
1. Release lock C by applying slight pressure (position 2).
2. Use handle B to pull engine cover downward slightly.
3. Pull handle B firmly downward until the engine cover engages.
4. Turn the starting key in lock A clockwise.
Fig. 277
A B
Fig. 278
1 2
C
C