EasyManua.ls Logo

Wacker Neuson ET65 - Operating Temperature Range; Machine Travel on Slopes

Wacker Neuson ET65
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA E14 track en* 1.3 * E14t_13_500.fm 5-7
Operation 5
Operating temperature range
Operate the vehicle only at ambient temperatures between 15 °C (5 °F)
and +45 °C (+113 °F).
Machine travel on slopes
WARNING
Crushing hazard due to tipping over of vehicle!
A tipping vehicle can cause serious injury or death.
Raise the boom 20 – 30 cm (8 – 12 in) off the ground and position it
straight ahead at the center of the vehicle.
In an emergency, lower the boom immediately to increase stability.
Travel on slopes only on firm and level ground.
Adapt the travel speed to the prevailing conditions.
Pay attention to persons and obstacles.
Pay attention to the stability limits of the vehicle (maximum gradient
angle 15°, maximum lateral angle of inclination 10°).
Perform uphill and downhill vehicle travel only in speed range 1.
Never reverse downhill.
Ensure that no parts of the body protrude outside the vehicle.
Do not exceed the permissible payloads.
Do not turn or swivel the upper carriage and the boom during downhill
or uphill vehicle operation with a full attachment.
Performing vehicle travel diagonally on slopes is prohibited.

Table of Contents

Related product manuals