Wacker Neuson ET65 - Inadmissible Work Procedures

BA E14 track en* 1.3 * E14t_13_510.fm 5-63
Operation 5
Inadmissible work procedures
NOTICE
Inadmissible operation can damage the vehicle or the attachment.
Working with the swivel force
Do not use the swivel force of the upper carriage to tear down walls or to
create level surfaces.
Do not ram the attachment into the ground when swiveling the upper
carriage.
Working with the drive force
Do not ram the attachment into ground or lower the boom during vehicle travel.
Retracting the attachment
When retracting the attachment, ensure that it does not touch the
stabilizer blade.
Fig. 237
Fig. 238
Fig. 239