Wacker Neuson ET65 - Sun Blind

4-8 BA E14 track en* 1.3 * E14t_13_400.fm
4 Putting into operation
Sun blind
The sun blind protects the operator against direct sunlight through the
front or roof windows.
The sun blind can be fastened at the headliner or front window with flap A.
Fastening the sun blind at the roof window
Pull the sun blind upward with flap A and hitch it on the headliner on the
left and right.
Removing the sun blind at the roof window
Unhitch and roll up the sun blind.
Fastening the sun blind at the front window
Pull the sun blind downward with flap A and hitch it on the front window on
the left and right.
Information
If the front window is raised, the sun blind then protects against the sun
shining through the roof window.
Removing the sun blind at the front window
Unhitch and roll up the sun blind.
Fig. 86
A
Fig. 87
Fig. 88