Wacker Neuson ET65 - Maintenance Plan

BA E14 track en* 1.3 * E14t_13_700.fm 7-3
Maintenance 7
Maintenance plan
Daily maintenance (operator)
Symbol
Inspection work
(Check the following fluids and lubricants, check the oil levels after a test
run and add oil if necessary)
Page
Check the fluids and lubricants (engine oil, engine coolant, hydraulic oil)
7-42; 7-45;
7-50
Check the radiator and hydraulic oil cooler for dirt, clean them if neces-
sary
7-46
Check the charge-air cooler for dirt, clean it if necessary (ET90/ET65
404F-E22TA)
Check the diesel cooler for dirt, clean it if necessary
(ET90/ET65 404F-E22TA)
Lubricate the vehicle according to the lubrication schedule 7-9
Check the water separator (pre-filter) and fuel filter on sight glass; drain
water if necessary (only ET65/EZ80)
7-36
Water separator (prefilter) and fuel filter: drain water according to indicat-
ing element
Check the track tension and retension the tracks if necessary 7-55
Check the engine air intake 7-47
Check the pin locks --
Check line fixtures --
Check the indicator lights and acoustic warning devices 4-36; 5-18
Check the swivel unit brake for correct function 5-22
Check the hydraulic couplings for dirt --
Check the threaded fittings of the protective structures (for example the
cabin) for tightness
--
Clean the lights/light system, signaling systems --
Safe load indicator: check the acoustic warning system 5-33